工业PLC控制六:输送设备命名规则

1 Conveyor Naming Convention Conventions 输送命名标准

Conveyors are typically named by the Conveyor Type and Department in which the conveyor system is located. The standard abbreviations for conveyor type and department are shown in the tables below.

输送设备通常由输送系统所在的输送设备类型和部门来命名。输送设备类型和部门的标准缩写如下表所示。

Conveyor Type 输送设备类型
ASR Automated Storage/Retrieval System 自动存储和检索系统
CHN Chain Conveyor 链式输送
FTR Fork Transfer 移栽叉
EMS Electrified Monorail System 电动单轨运输系统
SKD Skid 滑橇
SKL Skillet (Skid and Pallet)
SRS Shipping/Receiving System 运输/接收系统
VAC Vertical Adjusting Carrier 垂直调整载体
VDL Vertical Drop Lift 垂直升降机

部门和工艺区域缩写

BODYSHOP CONVEYORS 车身车间输送设备
BA A-Side of Body Shop 车身车间A侧
BB B-Side of Body Shop 车身车间B侧
BF Framing
BM Motor Component 发动机舱
BS Side Frame 侧围
BU Underbody 地板
BX Used Globally inside Body Shop
BZ Storage (i.e. Body Distribution Area) 存储(例如,车身分布区域)
PAINTSHOP CONVEYORS 涂装输送设备
1st Char. Department 部门
P Paint 涂装
2nd Char. Area 区域
B Body to Paint 车身到涂装
E Elpo
F Finesse
G Paint to GA 涂装到总装
L Panel Load/ Unload
M Mix Bank / Resequencer
N New PTED to Old Paint
P Pretreatment 预处理
R Prime 底涂
S Sealer 底漆
T Topcoat 面漆
U Underbody 地板
W Wet Sand / Washer
3rd Char. Function
B Booth
D Delivery
M Empty Carrier
P Production 生产线
R Repair 返修
S Strip
T Transfer
V Oven 烘炉

2 Conveyor Controller Level WD Naming Convention 输送控制级接线图命名规则

The controller WD name is created by a “WD-“ prefix, 2 letter code of the using plant, 3 letter conveyor type, 2 letter process area, and 2 digit sequence (specified by the project controls engineer).

控制器WD名称由“WD-”前缀、使用工厂的2个字母代码、3个字母输送类型、2个字母处理区域和2位数字序列(由项目控制工程师指定)创建。

Example Paint Conveyor Controller Level WD:
Skid Conveyor System (SKD)
Lansing Grand River Plant (LG)
Paint Pretreatment System (PPP)
Sequence Number (01)
Controller Level wiring diagram = WD-LG-SKD-PPP01

示例涂装输送控制级接线图:
滑橇输送系统(SKD)
Lansing Grand River Plant (LG)
涂装前处理系统 (PPP)
序列号 (01)
控制级接线图 = WD-LG-SKD-PPP01

3 Conveyor Unit Level WD Naming Convention 输送单元级接线图命名规则

The unit WD name is created by a “WD-“ prefix, 2 letter code of the using plant, 3 letter conveyor type, 2 letter process area, 2 digit sequence, and 4 digit mechanical unit number.

单位WD名称由“WD-”前缀,使用工厂的2个字母代码,3个字母输送机类型,2个字母处理区域,2个数字序列和4位机械单元号创建。

Example Paint Conveyor Unit Level WD:
Skid Conveyor System (SKD)
Lansing Grand River Plant (LG)
Paint Pretreatment System (PPP)
Sequence Number (01)
Mechanical Unit Number (11245)
Unit Level wiring diagram = WD-LG-SKD-PPP01-11245

示例涂装输送单元级接线图:
滑移输送系统(SKD)
Lansing Grand River Plant(LG)
涂装前处理系统 (PPP)
序列号 (01)
机械单元编号(11245)
单元级接线图= WD-LG-SKD-PPP01-11245